xTool WonderPress Overview: I Examined All 3 Modules + Actual Settings

xTool WonderPress Overview: What Can You Truly Make With It?

Is the xTool WonderPress actually greater than a warmth press? I wished to seek out out by truly utilizing each module as a substitute of simply unboxing the machine and exhibiting you the options.

I examined the xTool WonderPress Warmth Press, Craft Oven and 3D Kind Module to make three fully totally different tasks: a polymer clay instructor keychain, a 3D shaker card and a personalised Greenback Tree instructor tote.

And I discovered fairly just a few issues alongside the best way.

I needed to experiment with the Craft Oven to determine the correct polymer clay baking time, I made my very own vacuum-forming mildew with my xTool M2, and I examined common iron-on with the Warmth Press as a result of that’s what I truly use in my craft room.

What Is the xTool WonderPress?

The xTool WonderPress is a modular crafting system that permits you to do far more than conventional warmth urgent. Relying on the modules you select, you’ll be able to warmth press, bake and remedy craft supplies, and even type plastic into dimensional shapes.

That’s what initially caught my consideration. As a substitute of shopping for one machine that solely performs one sort of craft, WonderPress can broaden because the forms of tasks you make change.

You can begin with the Warmth Press Module and add different modules as you want them, or buy a setup that features the extra modules.

• Warmth Press Module: for iron-on/HTV and appropriate sublimation and DTF tasks.
• Craft Oven Module: for polymer clay, shrink plastic and different appropriate crafts that want managed heating or curing.
• 3D Kind Module: for heating and forming plastic round dimensional objects or molds.
• Twin Station: offers you two work surfaces so you’ll be able to put together one other mission whereas one is being pressed.

👉 See the xTool WonderPress and accessible module choices right here.

3 xTool WonderPress Initiatives I Examined

Because it’s back-to-school season, I made a decision to offer all three modules the identical theme and create a personalised instructor present set.

I made a polymer clay paint-palette keychain with the Craft Oven, a Instructing Is a Work of Coronary heart shaker card with the 3D Kind Module and a customized Greenback Tree instructor tote with the Warmth Press.

This ended up being a very good method to check the WonderPress as a result of none of those tasks makes use of the identical crafting method.

xTool WonderPress Craft Oven: Polymer Clay Keychain

I’ll begin with a confession: I don’t have a lot expertise with polymer clay.

I’ve labored with it earlier than, but it surely’s positively not one of many crafts I repeatedly do. Baking clay has all the time made me a bit of nervous as a result of I fear about utilizing the flawed temperature, taking it out too quickly or someway ruining one thing I simply spent all that point making.

That’s one cause I used to be focused on attempting the WonderPress Craft Oven. Having a devoted craft oven with managed settings took a few of that nervousness out of the method.

Nonetheless, I did must experiment with the settings.

I had a troublesome time discovering detailed directions on-line from somebody who had truly baked polymer clay within the WonderPress and shared precisely what settings and instances they used. So I’m documenting mine intimately in case you’re attempting to determine the identical factor.

Making the Polymer Clay Paint Palette

Since polymer clay isn’t actually my factor, I wasn’t about to begin my WonderPress experiment by sculpting one thing sophisticated!

I made a easy paint palette as a result of it’s mainly an natural blob form with a gap in it. Even I couldn’t mess that up too badly.

I additionally rolled among the leftover clay into easy beads that I may use on the completed keychain.

After baking and cooling all the things, I added the instructor’s identify with vinyl lower on my reducing machine. You may definitely hand-paint or hand-letter the identify, however drawing isn’t precisely one in all my skills, so I used the instruments I do know.

I added colourful paint dots with paint markers, strung the clay beads onto wire and hooked up all the things to the keychain {hardware}.

I really like the way it turned out, and it’s a really approachable polymer clay mission in case you’re a newbie like me.

I’ll hyperlink the precise polymer clay and provides I used within the provide record under.

xTool WonderPress 3D Kind Module: DIY Instructor Shaker Card

The 3D Kind Module was most likely the module I used to be most interested in as a result of that is the place WonderPress begins doing one thing fully totally different from an everyday warmth press.

It heats and kinds appropriate plastic round an object or mildew, permitting you to create dimensional items on your crafts.

I made a decision to make use of it to make a transparent heart-shaped shaker for a card that claims:

Instructing Is a Work of Coronary heart ❤️

However as a substitute of utilizing an current mildew, I wished to see if I may make my very own customized mildew with my xTool M2.

How I Made My Personal 3D Kind Mould with the xTool M2

I lower two similar coronary heart shapes from roughly 3mm basswood utilizing my xTool M2.

I glued the 2 hearts collectively and evenly sanded the perimeters and edges to create a easy form for the plastic to type round.

It labored—however I already know what I might change subsequent time.

I might use 4 layers as a substitute of two.

The 2 layers created sufficient depth for my shaker card, however 4 layers would create a deeper pocket and provides the glitter and confetti extra room to maneuver.

That’s a type of belongings you don’t essentially know till you truly make the primary one.

Making the Coronary heart Shaker Pocket

I positioned my picket coronary heart type onto the 3D Kind Module and used one of many plastic sheets included with the module.

The WonderPress heated the fabric and shaped it round my customized picket coronary heart, creating the clear dimensional pocket I wanted for the cardboard.

Then I lower the cardboard layers from cardstock I already had in my craft stash.

DIY Wood Instructor Confetti with xTool M2 Print Then Reduce

I may have crammed the center with common glitter and referred to as it completed, however after all I couldn’t go away it alone.

I used Greenback Tree glitter together with tiny customized teacher-themed picket confetti that I made utilizing xTool M2 Print Then Reduce.

The miniature instructor designs made the shaker a lot extra distinctive than utilizing plain glitter alone.

I’m truly contemplating making units of this picket instructor confetti for my Etsy store. If that’s one thing you’d use for shaker playing cards or different crafts, go away me a remark and let me know!

xTool WonderPress Warmth Press: Greenback Tree Instructor Tote

Subsequent got here the module I’ve significantly extra expertise with: the Warmth Press.

The WonderPress can help crafts together with sublimation and DTF transfers, however I truly don’t at the moment do both of these forms of crafting. I do know—that may be stunning!

As a substitute, I examined it with one thing I’ve been utilizing for years: good old school iron-on warmth switch materials.

I’ve been making heat-transfer tasks since 2013, and I’ve used fairly just a few totally different warmth presses and urgent instruments throughout that point.

After utilizing this one, I can confidently say that the WonderPress is by far the very best warmth press I’ve personally owned.

Greenback Tree Customized Instructor Tote

I began with a easy tote bag from Greenback Tree and lower a design that claims Mrs. Smith’s Instructor Issues from iron-on utilizing my reducing machine.

I positioned the urgent pad contained in the tote, positioned the iron-on and coated it with the protecting sheet that got here with the WonderPress.

And it got here out excellent.

I obtained even strain with out having to face over the machine and manually press down, and the completed switch adhered fantastically.

Is the xTool WonderPress Twin Station Price It?

I even have the WonderPress Twin Station, and I believe this turns into particularly helpful in case you’re making multiples.

As a substitute of ready for one mission to complete earlier than establishing the following one, you’ll be able to put together one other clean on the second station whereas the primary mission is urgent.

For somebody making shirts, tote baggage or customized merchandise in batches, that may make the workflow far more environment friendly.

And that’s notably attention-grabbing to me as a result of I’m all the time taking a look at craft instruments from two views: What can I make with this? And will I take advantage of it to make merchandise to promote?

DIY Customized Instructor Reward Set

As soon as I put all three tasks collectively, I had a complete customized instructor present set:

• Customized Greenback Tree instructor tote
• Handmade polymer clay palette keychain
• Instructing Is a Work of Coronary heart shaker card
• Customized picket instructor confetti

What I actually like is that these don’t really feel like three variations of the identical craft. One is polymer clay, one is paper crafting and 3D forming, and one makes use of warmth switch.

That’s actually the place I began to know the attraction of the WonderPress system.

Might You Promote This Instructor Reward Set on Etsy?

You recognize I can’t make one thing with out instantly questioning whether or not it may develop into a product to promote.

Packaged properly as a ready-to-give customized instructor present, I might most likely check this set round $25–$27 after which alter the worth based mostly on precise materials prices, personalization, packaging, manufacturing time, charges and buyer response.

You may additionally check the person items as separate merchandise:

• Customized instructor totes
• Polymer clay instructor keychains
• Instructor shaker playing cards
• Wood instructor confetti
• Customized instructor present bundles

That’s one in all my favourite methods to method a craft enterprise: as a substitute of continually attempting to invent one thing fully new, take a look at one mission and ask what number of totally different merchandise or gives you possibly can create from it.

Is the xTool WonderPress Price It?

After testing all three modules, I believe the most important benefit of WonderPress is that you just’re not restricted to at least one sort of crafting.

You too can select the setup based mostly on what you truly make. In case you primarily make heat-transfer tasks, you can begin there. If you wish to broaden into different forms of crafting, you’ll be able to add further modules as you want them.

For me personally, the Warmth Press was the standout. I’ve been working with heat-transfer merchandise for greater than a decade, and that is simply my favourite warmth press I’ve owned.

The Craft Oven pushed me exterior of the forms of crafts I usually make, whereas the 3D Kind Module opened up prospects I hadn’t actually thought of earlier than—particularly as soon as I spotted I may create my very own customized kinds.

👉 See the xTool WonderPress, present bundles and module choices right here.

xTool WonderPress FAQs

Is the xTool WonderPress solely a warmth press?

No. WonderPress is a modular crafting system. Along with warmth urgent, appropriate modules can add craft-oven and 3D-forming capabilities.

Are you able to bake polymer clay within the xTool WonderPress?

I used the WonderPress Craft Oven to bake polymer clay at 265°F for roughly half-hour whole utilizing Baking & Curing Mode, the Shrink Plastic setting and a 30-second exhaust time. These settings labored with my clay, however all the time comply with the curing suggestions on your particular product.

What xTool WonderPress settings work for HTV?

For the iron-on used on my Greenback Tree tote, I used 315°F for 30 seconds at 60 kg strain, adopted by a further roughly five-second press after including the smaller element. Comply with the suggestions on your particular HTV and clean.

Are you able to make your individual mildew for the xTool WonderPress 3D Kind Module?

I made a customized coronary heart type from two layers of roughly 3mm basswood lower with my xTool M2. I glued the layers collectively and evenly sanded the perimeters earlier than utilizing it with the 3D Kind Module. Subsequent time, I might use 4 layers to create extra depth.

Do I want a WonderPress to make the instructor shaker card?

No. I’m creating an entire workshop that additionally consists of another method to make the shaker factor in case you don’t have the WonderPress 3D Kind Module.

Can you utilize the xTool WonderPress for crafts to promote?

Sure. Warmth-transfer merchandise similar to customized totes and attire are apparent prospects, however the Craft Oven and 3D Kind Module additionally open up further choices for handmade merchandise. The Twin Station can even make batch urgent extra environment friendly while you’re producing multiples.

Watch My Full xTool WonderPress Tutorial 

If you wish to watch your complete course of from starting to finish, together with how I used every of the three modules and what I discovered whereas testing them, you’ll be able to watch my full WonderPress video under.

And I’m not completed experimenting with WonderPress but. Keep tuned as a result of I’ll be testing much more craft prospects with it in my subsequent video!

Pin this put up for later

Disclaimer: This put up could include affiliate hyperlinks or a sponsored put up. All opinions are all the time 100% mine and I don’t associate with any product or firm that I don’t use and love. Please see our Full Disclosure for extra data.