Worn lacquer, scratches, and broken patches coated this Fb Market dresser, however its bowed drawer fronts, curved ft, formed high, and ornate {hardware} have been nonetheless intact. Reddit person u/Zio_2 purchased the Dixie dresser when he wanted storage and used it for his first furnishings refresh.
As a substitute of fixing the dresser’s form, he eliminated the failing end, sanded the wooden, cleaned the surfaces, and painted the whole exterior blue. He selected the shade after fascinated with the French powder blue seen on interval furnishings, then returned the unique {hardware} to the drawers.
Worn End Lined a Dresser With Curved Particulars
Six bowed drawers fill the entrance, with slender molded edges following every curve. Cabriole-style ft proceed the form on the base, whereas a projecting high follows the identical bowed line throughout the entrance.
Scratches, worn lacquer, and uncovered wooden coated the highest and drawer fronts. The darkish steel pulls remained intact, giving the venture {hardware} that would keep after the end modified.
Scratches and Lacking Lacquer Lined the Prime
Massive sections of the highest had misplaced their end, leaving patches of uncovered wooden beside areas the place the previous coating remained. Scratches, marks, and stains crossed each surfaces.
The harm unfold throughout the highest moderately than sitting in a single restore space. Eradicating the remaining end created a constant floor for paint.
Curved Drawer Fronts Made Stripping the End Tougher
All six drawers got here out so their fronts may very well be stripped other than the body. Stripper coated the curved faces and molded edges the place the previous lacquer remained.
u/Zio_2 began with Citristrip earlier than switching to a stronger chemical stripper. He described stripping as the toughest a part of the venture as a result of the end held contained in the grooves.
Outdated Lacquer Stayed Contained in the Molded Edges
An in depth view exhibits loosened end throughout the drawer molding, with naked wooden showing between streaks of stripper and previous coating.
Flat sections supplied room for energy sanding, however the curved edges wanted one other method. u/Zio_2 used a sanding sponge that would comply with the contours as an alternative of chopping throughout them.
Sanding Eliminated What the Stripper Left Behind
After stripping, sanding cleared the remaining residue and ready the drawer fronts for paint. u/Zio_2 used 80-grit for cussed materials, then moved to 200-grit earlier than cleansing the surfaces with a tack material.
The drawer curves, edge molding, and {hardware} holes stayed unchanged via the method.
French Powder Blue Changed the Worn Brown End
Blue paint now runs from the formed high via the drawer fronts, aspect panels, body, and curved ft. The one shade connects particulars that have been more durable to see towards the broken brown end.
u/Zio_2 needed a mushy shade based mostly on previous French furnishings seen in interval exhibits. He selected Behr Race Boat Blue and utilized the paint with a foam curler.
Authentic {Hardware} Went Again Onto the Painted Drawers
Darkish ornate pulls returned to all six drawer fronts as an alternative of being changed with trendy {hardware}. Their curved varieties comply with the dresser’s present traces, whereas the darkish steel stands towards the blue paint.
The bowed fronts stay the primary function. Paint covers the wooden grain, however it doesn’t flatten the molding or disguise the curves that run throughout the dresser.
Paint Modified the End With out Altering the Dresser
The completed piece retains the formed high, six bowed drawers, curved ft, aspect panels, and unique pulls seen on the Fb Market discover.
What disappeared was the worn brown floor. Stripping, sanding, and French powder blue paint took the dresser from scratched and patchy to at least one constant end with out rebuilding its body or changing its {hardware}.
Would you could have restored the brown end or painted the dresser blue?
Picture credit go to Reddit person u/Zio_2.
