Simple One Board Customized Backpack Hanger
Give each child their very own designated spot for backpacks with this straightforward DIY backpack hanger. Every one is constructed from a 1×12 board, so there’s little or no chopping or meeting required.
Add a monogram, preliminary or title to personalize every backpack station, then set up a sturdy hook under it. Make only one, or construct a number of and hold them side-by-side to create a cheap backpack group wall for the entire household.
Personalize Every Backpack Hanger
That is such a enjoyable challenge to customise for every little one. You possibly can add a big wooden letter, painted preliminary, vinyl title or different customized element to the higher portion of the board.
Maintaining every backpack by itself board additionally provides cumbersome faculty luggage extra room than a conventional row of intently spaced hooks.
Add a Backpack Hook
Set up a sturdy hook under the monogram or title. Heart the hook on the board and place it low sufficient that the backpack has room to hold with out protecting the customized space.
Backpacks can get surprisingly heavy after they’re stuffed with books, water bottles and college provides, so use a good-quality hook and screws.
Dangle One for Every Child
One of the best half about this challenge is you could make as many as you want. Dangle a number of customized backpack holders side-by-side in an entryway, mudroom, hallway or homeschool space.
Since every hanger is its personal separate piece, you’ll be able to area them farther aside for bigger backpacks or add one other one later as your loved ones’s storage wants change.
Find out how to Dangle the Backpack Board
As a result of the backpack and the whole lot inside it may be heavy, securely connect the 1×12 board to the wall. Each time attainable, drive mounting screws by way of the board and immediately into wall studs.
Use a degree to ensure the board is straight earlier than tightening the screws. Should you’re making a number of backpack stations, use the primary one as a reference so all the boards are put in on the identical peak.
Tip: Depart loads of area between every board so backpacks can hold naturally with out overlapping.
